Sako TRG 22 Picatinny Skena - huvudbild
HG Firearms

Sako TRG 22 Picatinny Rail

STEEL · QPQ

1.095,00 kr

Inkl. moms. Fragtomkostninger beregnes ved checkout.

Vælg MOA

This Picatinny rail fits:

Sako TRG 22

May also fit: Sako TRG 42

How to check if the rail fits your rifle

Note: This rail fits the Sako TRG 22. Manufacturer data indicates the same pin spacing for TRG 22 and TRG 42.

Specifications:

Manufacturer HG Firearms is the manufacturer of this Picatinny rail. Read more HG Firearms
Material The material affects weight, wear resistance, and application. Read more Steel
Surface Treatment QPQ is a surface treatment that increases wear resistance and corrosion resistance. Read more QPQ
MOA MOA indicates the rail's incline and can provide more elevation adjustment in the scope. Read more 0 MOA, 10 MOA, 20 MOA, 30 MOA
Screws 6-48 Leupold TORX screws, included
A/B/C-dimensions A/B/C-dimensions are used to check hole spacing and fit before purchase. Read more 22.00 / 22.00 / 65.30 + 22.00 mm
Length 165 mm

What's included in the package

1 pc. Picatinny rail and 6-48 Leupold TORX screws, included.

Overflade

This rail is QPQ treated (Quench-Polish-Quench). QPQ is a salt bath nitriding process that creates an extremely hard and corrosion-resistant surface. The treatment penetrates the steel and is not just a coating – even deep scratches still reveal treated material.

QPQ provides a matte, black finish and is the most durable surface treatment for steel rails and steel mounts. A QPQ-treated rail requires minimal maintenance and can withstand heavy use in all weather conditions.

Read more:QPQ treatment – what is it, and why is it important?

Montering

Installation of this rail is quick and simple. The rail is attached directly to the rifle's receiver with the included screws.

Manufacturer's recommendation:

  • Tightening torque: 3.5 Nm
  • Apply oil to the screws (NOT threadlocker)
  • Tighten the screws in a cross pattern for even distribution

A torque wrench is necessary for correct installation. Overtightening can damage the threads in the receiver.

Read more: Installing a Picatinny rail – complete guide

MOA

MOA stands for Minute of Angle and indicates the cant of the rail. An angled rail compensates for bullet drop over distance by tilting the scope slightly forward. This gives you more elevation adjustment in the scope's turret – if you need to shoot very long distances.

For most target and hunting scenarios, 0 MOA (flat rail) is more than sufficient. If you are shooting at longer distances or using a scope with limited elevation, 10 or 20 MOA can give you the extra margin you need.

Read more in our article: What is MOA, and when do you need it?

Materiale

This rail is made of steel, which remains the classic choice for both mounts and Picatinny rails. Steel has high rigidity and is extremely durable. The material can withstand repeated mounting and unmounting without deforming the contact surfaces.

Steel is heavier than aluminum, but for a Picatinny rail, the weight difference is practically minimal – typically less than 50 grams.

Read more: Steel vs. aluminum – which is best for your rifle?

Brand

Rails and mounts from HG Firearms are designed and custom-made in Denmark. The primary material is steel, and no compromises are made. They are known for precision-manufactured steel rails with QPQ surface treatment, providing maximum durability and corrosion protection. HG Firearms covers a wide range of rifle platforms with a focus on quality and fit.

Read more about HG Firearms here: HG Firearms

See all products from HG Firearms: HG Firearms collection